Galfer Wave V2 180 mm 2,0 mm gold rotor
40,00 €
Condition:
Used
Additional information
Selling a lightly used Galfer Wave V2 rotor, diameter 180 mm, thickness 2,0 mm, 6-bolt mounting; bolts included. The rotor is not warped and has no faults; it still has almost as much "meat" as new. The rivets are gold.
Lightweight Galfer Wave brake rotors are made of high-quality, laser-cut high-carbon stainless steel. Carbon provides high heat resistance, especially in the braking track area.
In addition, quiet low-vibration Wave rotors provide strong, progressive braking performance, ensuring even brake-force distribution in both wet and dry conditions. Effective anti-corrosion treatment ensures long-lasting durability. The Wave Floating brake rotor has its unique appearance thanks to a black-painted steel spider combined with rivets available in various colours.
To further improve the braking performance of the second generation, the spider and friction ring were redesigned. Optimised joints ensure lower overall weight combined with greater resistance. Brake rotor thickness increased from 1,8 to 2,0 mm to achieve greater stiffness and even better thermal stability.
Wave Floating brake rotors are inspired by motocross and designed for demanding Enduro and Downhill disciplines, where brake requirements are higher than in any other MTB discipline. Due to this orientation, they are also suitable for use on e-bikes, where greater heat resistance is also needed.
The True Floating system is based on slight axial movements between the braking surface and carrier. When necessary, TF technology achieves precise alignment between the pads and rotor during braking. This mobility reduces vibration and ensures strong, precise and stable brake-force distribution. In addition, thermal separation of the pad and carrier prevents brake rotor deformation and achieves more even brake pad wear.
Wave Floating V2 brake rotor features:
- powerful, progressive braking performance
- no noise or vibrations
- resistance to high temperatures
- high efficiency in wet and dry conditions
- anti-corrosion treatment
- coloured pins for customisation
- True Floating (TF) technology:
- more consistent brake-force distribution and less wear
- brake rotor thickness: 2,0 mm
- area of use: MTB (XC, AM, Enduro, DH)
- weight: approx. 146 g
Made in Spain.
For more info, contact me by message or tel. 051-241-591
Lightweight Galfer Wave brake rotors are made of high-quality, laser-cut high-carbon stainless steel. Carbon provides high heat resistance, especially in the braking track area.
In addition, quiet low-vibration Wave rotors provide strong, progressive braking performance, ensuring even brake-force distribution in both wet and dry conditions. Effective anti-corrosion treatment ensures long-lasting durability. The Wave Floating brake rotor has its unique appearance thanks to a black-painted steel spider combined with rivets available in various colours.
To further improve the braking performance of the second generation, the spider and friction ring were redesigned. Optimised joints ensure lower overall weight combined with greater resistance. Brake rotor thickness increased from 1,8 to 2,0 mm to achieve greater stiffness and even better thermal stability.
Wave Floating brake rotors are inspired by motocross and designed for demanding Enduro and Downhill disciplines, where brake requirements are higher than in any other MTB discipline. Due to this orientation, they are also suitable for use on e-bikes, where greater heat resistance is also needed.
The True Floating system is based on slight axial movements between the braking surface and carrier. When necessary, TF technology achieves precise alignment between the pads and rotor during braking. This mobility reduces vibration and ensures strong, precise and stable brake-force distribution. In addition, thermal separation of the pad and carrier prevents brake rotor deformation and achieves more even brake pad wear.
Wave Floating V2 brake rotor features:
- powerful, progressive braking performance
- no noise or vibrations
- resistance to high temperatures
- high efficiency in wet and dry conditions
- anti-corrosion treatment
- coloured pins for customisation
- True Floating (TF) technology:
- more consistent brake-force distribution and less wear
- brake rotor thickness: 2,0 mm
- area of use: MTB (XC, AM, Enduro, DH)
- weight: approx. 146 g
Made in Spain.
For more info, contact me by message or tel. 051-241-591
Prodam malo rabljen rotor Galfer Wave V2 premera 180 mm debeline 2,0 mm pritrditev na 6 vijakov, vijake priložim zraven. Disk ni zvit in je brez napak, "mesa" še ima skoraj tako kot nov. Zakovice so v zlati barvi.
Lahki zavorni diski Galfer Wave so izdelani iz visokokakovostnega, lasersko rezanega nerjavečega jekla z visoko vsebnostjo ogljika. Ogljik zagotavlja visoko toplotno odpornost, zlasti na območju zavorne steze.
Poleg tega tihi rotorji Wave z nizkimi vibracijami zagotavljajo močno, progresivno zavorno zmogljivost, ki zagotavlja enakomerno porazdelitev zavorne sile tako v mokrih kot suhih pogojih. Učinkovita protikorozijska obdelava zagotavlja dolgotrajno vzdržljivost. Zavorni disk Wave Floating ima svoj edinstven videz zaradi črno barvanega jeklenega pajka v kombinaciji z zakovicami, ki so na voljo v različnih barvah.
Za dodatno izboljšanje zavorne zmogljivosti druge generacije sta bila pajek in torni obroč prenovljena. Optimizirani spoji zagotavljajo manjšo skupno težo v kombinaciji z večjo odpornostjo. Debelina zavornega diska se je povečala z 1,8 na 2,0 mm, da bi dosegli večjo togost in še boljšo toplotno stabilnost.
Zavorni diski Wave Floating so navdihnjeni z motokrosom in zasnovani za zahtevne discipline Enduro in Downhill, kjer so zahteve glede zavor višje kot v kateri koli drugi disciplini MTB. Zaradi te orientacije so primerni tudi za uporabo na električnih kolesih, kjer je potrebna tudi večja odpornost na toploto.
Sistem True Floating temelji na rahlih aksialnih premikih med zavorno površino in nosilcem. Po potrebi tehnologija TF doseže natančno poravnavo med ploščicami in diskom med zaviranjem. Ta mobilnost zmanjšuje vibracije in zagotavlja močno, natančno in stabilno porazdelitev zavorne sile. Poleg tega toplotna ločitev ploščice in nosilca preprečuje deformacijo zavornega diska in dosega enakomernejšo obrabo zavornih ploščic.
Značilnosti zavornega diska Wave Floating V2:
- zmogljiva, progresivna zavorna zmogljivost
- brez hrupa in vibracij
- odpornost na visoke temperature
- visoka učinkovitost v mokrih in suhih pogojih
- obdelava proti koroziji
- barvni zatiči za prilagoditev
- Tehnologija True Floating (TF):
- bolj konstantna porazdelitev zavorne sile in manjša obraba
- debelina zavornega diska: 2,0 mm
- območje uporabe: MTB (XC, AM, Enduro, DH)
- teža: približno 146 g
Izdelano v Španiji.
Za več info. sem vam na voljo preko sporočila ali pa tel. 051-241-591
Lahki zavorni diski Galfer Wave so izdelani iz visokokakovostnega, lasersko rezanega nerjavečega jekla z visoko vsebnostjo ogljika. Ogljik zagotavlja visoko toplotno odpornost, zlasti na območju zavorne steze.
Poleg tega tihi rotorji Wave z nizkimi vibracijami zagotavljajo močno, progresivno zavorno zmogljivost, ki zagotavlja enakomerno porazdelitev zavorne sile tako v mokrih kot suhih pogojih. Učinkovita protikorozijska obdelava zagotavlja dolgotrajno vzdržljivost. Zavorni disk Wave Floating ima svoj edinstven videz zaradi črno barvanega jeklenega pajka v kombinaciji z zakovicami, ki so na voljo v različnih barvah.
Za dodatno izboljšanje zavorne zmogljivosti druge generacije sta bila pajek in torni obroč prenovljena. Optimizirani spoji zagotavljajo manjšo skupno težo v kombinaciji z večjo odpornostjo. Debelina zavornega diska se je povečala z 1,8 na 2,0 mm, da bi dosegli večjo togost in še boljšo toplotno stabilnost.
Zavorni diski Wave Floating so navdihnjeni z motokrosom in zasnovani za zahtevne discipline Enduro in Downhill, kjer so zahteve glede zavor višje kot v kateri koli drugi disciplini MTB. Zaradi te orientacije so primerni tudi za uporabo na električnih kolesih, kjer je potrebna tudi večja odpornost na toploto.
Sistem True Floating temelji na rahlih aksialnih premikih med zavorno površino in nosilcem. Po potrebi tehnologija TF doseže natančno poravnavo med ploščicami in diskom med zaviranjem. Ta mobilnost zmanjšuje vibracije in zagotavlja močno, natančno in stabilno porazdelitev zavorne sile. Poleg tega toplotna ločitev ploščice in nosilca preprečuje deformacijo zavornega diska in dosega enakomernejšo obrabo zavornih ploščic.
Značilnosti zavornega diska Wave Floating V2:
- zmogljiva, progresivna zavorna zmogljivost
- brez hrupa in vibracij
- odpornost na visoke temperature
- visoka učinkovitost v mokrih in suhih pogojih
- obdelava proti koroziji
- barvni zatiči za prilagoditev
- Tehnologija True Floating (TF):
- bolj konstantna porazdelitev zavorne sile in manjša obraba
- debelina zavornega diska: 2,0 mm
- območje uporabe: MTB (XC, AM, Enduro, DH)
- teža: približno 146 g
Izdelano v Španiji.
Za več info. sem vam na voljo preko sporočila ali pa tel. 051-241-591
Matej Hostnik
Related listings
